HDPE — Solid Wall
PE4710 Water & Pressure Pipe
Standards: AWWA C901/C906, ASTM D3035, F714; NSF 14/61.
| Size (OD) | DR | Typical Pressure |
|---|---|---|
| ½″ – 3″ | 9 – 17 | 160–250 psi |
| 4″ – 24″ | 7 – 32.5 | 125–335 psi |
| 30″ – 63″ | 11 – 32.5 | 80–200 psi |
Fusion joining: butt, electrofusion, socket. IPS & DIPS options.
HDPE — Corrugated
Drainage & Stormwater
Standards: ASTM F2648, AASHTO M252/M294.
| Size (ID) | Typical Use |
|---|---|
| 4″ – 12″ | Residential & site drainage |
| 15″ – 36″ | Municipal storm sewers |
| 42″ – 60″ | High-capacity culverts |
Single- & dual-wall options; smooth interior available.
PVC — Pressure
AWWA C900/C905
For potable water distribution and transmission.
| Size (OD) | Class / SDR | Typical Pressure |
|---|---|---|
| 4″ – 12″ | DR18 / DR14 | 150–235 psi |
| 16″ – 24″ | DR25 / DR18 | 100–235 psi |
| 30″ – 48″ | per spec | Up to ~200 psi |
Bell-and-spigot (gasketed); solvent-weld for schedule pipes (ASTM D1785).
PVC — Sewer
Gravity Sewer & Drain
Standards: ASTM D3034 (e.g., SDR 35), D2241 for pressure-rated SDR.
| Size (OD) | SDR | Typical Use |
|---|---|---|
| 4″ – 8″ | SDR 35 | Residential/collector sewers |
| 10″ – 24″ | SDR 35/26 | Municipal gravity sewer |
| ≥ 30″ | per spec | Large trunk lines |
PEX — Plumbing
Potable & Radiant
Standards: ASTM F876/F877, NSF 14/61.
- Sizes: ⅜″ – 2″
- Fittings: crimp, clamp, expansion
- Hot/cold water service, radiant heating